How to Make Rubber Floor Mats Shine

How to Make Rubber Floor Mats Shine?

Rubber floor mats protect your car’s carpeting from dirt and liquids. They are also a place where germs can breed and create a mess in your vehicle. Rubber mats in your car will definitely wear out after a long period.

No matter how clean you are, dust and dirt will still find their way onto the mats. It is essential to use your car to travel through places where there is a lot of dirt and dust, as is usually the case during the winter and when it rains and snows.

While rubber floor mats aren’t difficult to clean, they require special care to restore their luster. However, many people leave the floor mats of their car unattended. After years of use, they look like they need to be replaced. But this is not the only option. It is possible to make them shine once again.

Want to find a way to make your rubber car mats shine? Are you unsatisfied with the way they look? Are they slippery, dirty, and dull? Don’t worry. In this post, you will learn how to make rubber floor mats shine.

Why Do You Need That Shine?

Your car is one of the most important investments you have. In addition to having a high monetary value, it has a significant sentimental value for those who love their cars. Keeping a vehicle in good condition and ensuring it lasts for several years is everyone’s goal.

Your vehicle’s rubber floor mats are going to suffer a lot of wear and tear. That’s why you should clean them regularly. Not only for the sake of cleanliness but also for your and your passengers’ safety.

Maintaining a good, clean shine makes your car look better, which is important if you want it to retain its value. That isn’t the primary reason you should make sure your rubber mats are clean.

When rubber mats are dirty, they can pose a safety threat, especially in the winter months when ice and snow can accumulate and make driving difficult. Therefore, it is vital to clean rubber mats regularly.

What Causes Rubber Floor Mats to Fade?

The rubber floor mats of a car fade for many reasons. Here are some of the most common causes.

1. Sunlight

Sunlight is the main culprit of rubber mat fading. If you park in a covered spot, you can significantly slow down fading.

Rubber floor mats can fade if they are constantly exposed to sunlight. Rubber is porous and contains hydrocarbon chains that are vulnerable to sunlight. It is also why rubber tires fade, as both tires and floor mats are composed of similar materials.

If a car is parked in the sun for long periods, the heat can melt the mat and cause it to fade.

2. Footwear

We wear shoes or sandals that have a significant impact on the rubber floor mat of our car. The soles of shoes have chemicals that will react with the rubber mat.

These chemicals change the color of the mats when they come in contact with them. But, this is not something that you can control.

Moreover, the mats wear out over time due to friction between your feet and the mat. Some rubber wears out faster than others. It is easy for the floor mat to become worn down when this happens. As a result, the floor mat will begin to fade or discolor.

3. Dirt

Dirt, grit, and grime are the biggest cause of color fading in rubber floor mats. Regardless of how durable any mat is, if dirt, sand, or grit get caught between it, microscopic scratches form on its surface.

These scratches become larger and more pronounced with time until they are visible to the naked eye.

4. Moisture

Moisture content from rain and snow can also affect the quality of your rubber mats as well as their color. That is why you should dry out your car floor if it gets wet or moist before using it again.

5. Oil or Grease Leakage

It is very easy for oil or grease leakages from any part of the vehicle to stick to the mats and cause them to fade.

What You’ll Need to Make Rubber Floor Mats Shine?

Fortunately, it’s easy to make rubber floor mats shine. Here’s what you’ll need:

  • The vacuum cleaner
  • Mild cleaning solution (dish soap and water)
  • A scrub brush or bristle brush
  • A hairdryer (optional)
  • Bucket
  • Warm water
  • A garden hose
  • Baking soda (optional)
  • Towels or microfiber cloths

How to Make Rubber Floor Mats Shine?

By following the steps below, you can make the rubber floor mats of your car shine.

1. Vacuum Clean

Remove dirt from the mat with a vacuum cleaner. Start by working on the top of the mat, then move to the bottom, and finally to the inner side of the mat. Thus, all dirt and dust particles are removed from the mat.

2. Prepare a Solution

Fill a bucket with warm water and add a few drops of dish soap. Be sure to mix it thoroughly so that bubbles appear.

3. Wash the Mats

Apply soap or liquid detergent on all surfaces of rubber floor mats using a sponge and gently rub it on each part of your rubber floor mats. If there are still stains, use toothbrushes or brushes with soft bristles to clean them up. Do this step until all nasty stains are gone.

4. Rinse Your Mats

Rinse your rubber floor mats with a garden hose after using soap or liquid detergent.

5. Dry Them Out

Before reinstalling your rubber floor mats in your car, dry them thoroughly with a microfiber cloth or in a warm place where they can dry completely. Make sure no moisture remains on the rubber floor mats.

6. Apply Shine Enhancer

Apply the rubber floor mats shine enhancer of your choice to the clean and dry car mat. Let the shiner sit for about two minutes, then wipe off excess product from the floor mat.

Buff out any remaining shiner using a clean microfiber towel.

How to Make Rubber Floor Mats Black Again?

Making rubber floor mats black again isn’t as hard as it seems. The most important thing is to be careful not to scratch or damage the mats while cleaning.

You only need to wash your rubber floor mats with baking soda. Below are the steps to follow.

  1. Remove the mats from your vehicle and shake them out. It will remove loose dirt and debris from the mats and make cleaning easier.
  2. Mix water and baking soda in a bucket until thick paste forms. Baking soda is a natural cleaning product that works well for various stains and smells.
  3. Spread the paste on each mat and let it sit for about 20 minutes before scrubbing with a brush or cloth rag to loosen dirt stuck between the grooves in its surface texture.
  4. Any remaining residue should be rinsed off with warm water. Then use paper towels or an old towel that can be thrown away afterward, so there isn’t any excess moisture left behind that could lead to mold growth inside your vehicle.

How Often Should You Clean Your Rubber Mats?

Cleaning your rubber mats at least every few weeks is a good idea, especially during the winter when they are more likely to get dirty from snow and ice.

You can also give them a quick wipe down every week or two to remove any loose dirt that might have accumulated since your last deep cleaning. It will help keep the mats looking nice, too.


No matter how much you take care of your car, its interior can get dirty and worn down over time. A car is used for so much more than just driving. You eat, drink and do all sorts of things inside your vehicle. It can make keeping it clean a bit of a challenge.

Using the information provided in this article about how to make rubber floor mats shine, you will be able to fix most of the problems with your rubber floor mats.

With a little bit of dedication and care, you can reduce the amount of shine fade in your rubber floor mats so that you can continue to use them for a long time.

Spread the love